The first thing to check is whether your furnace is operating properly. If it doesn’t, it’s possible that the system isn’t working correctly. A malfunctioning furnace can take your comfort away quickly, so it’s best to call a professional service. A few simple steps can ensure that your system is working properly. You can check for a blocked air intake vent by looking in the attic. Make sure that the pipe is clear of any debris.
Check your thermostat. If it is set to “Heat,” it may be malfunctioning. If not, turn the dial to a temperature that feels comfortable. Next, look in your breaker panel. If it is not in the middle position, you can manually test it. Otherwise, call a professional to get it fixed. If all else fails, check the safety switch. If you find it, you should call a professional to fix the problem.
A furnace’s thermostat should be checked. The temperature should be set to auto. This way, the system isn’t constantly running and wastes energy. You can also check the ducts and vents. You may also want to check the thermostat’s settings. If the settings aren’t working, try punching in the desired temperature using the up/down control. If the programming doesn’t work, you can press the hold button to turn on the furnace.
In order to clean the pilot light, turn off the power and gas. A thin wire poked through the tiny orifice can knock out debris. You should also check the flame adjustment screw, which is located in some pilot lights. If it doesn’t, turn off the gas and power, as it will damage the pilot light. You should also make sure that all the wiring is disconnected before starting the cleaning process. If everything seems okay after these steps, you should contact a professional service to check the thermostat.
If the power is on, you can check the thermostat. You should check the temperature setting to be comfortable. If the furnace is on, check the safety switch. This could prevent the furnace from operating. If this is the case, you should have a technician come and diagnose the problem. If the thermostat is off, you’ll need to adjust the circuit breaker. If the power is on, the pilot light should be burning. You should have to restart the furnace for it to work correctly.
The thermostat should be set to the heat setting. The circuit should be in the middle position. If the thermostat is not working, try to reset it manually. In some cases, the problem may be the wiring. If this is the case, it’s best to call a professional service to help. If the furnace is running, then it’s most likely that the problem is the ignition. The spark switch can be easily tripped. But if it is, the circuit breaker should be turned off.